11 #RGBchest

11 #RGBchest

Finally, me and my partner started putting in the RGB'S. As you can see in the featured image, we put the lights in the bottom layer of the chest in a zig zag way. In order to make sure the lights stuck...

Continue Reading
9 #RGB chest

9 #RGB chest

It has been a long time since this project log has been updated. Since the last time it was updated we have done many things. Basically, we put together the box using drills and screws. We used one drill...

Continue Reading
8 #RGBchest

8 #RGBchest

In today's class, me and my partner put the finishing touches on our wood. We have completed all the wood steps and perfected the wood by sanding each piece. Every layer of wood was cut just right and...

Continue Reading
7 #RGBchest

7 #RGBchest

In today's class we drilled a square hole in one of our wood pieces. This hole is to provide a spot for the power source to go through. In our chest, we will have a layer of lights so this electricity...

Continue Reading
6 #RGBchest

6 #RGBchest

During today's class, me and Tarquin finished up our cutting process by cutting out the top to our chest. Now, all seven of our peaces are cut and we are making sure we did not make any mistakes. All our...

Continue Reading
5 #RGBchest

5 #RGBchest

Today, me and Tarquin worked on cutting out our wood that we marked the previous class. We cut 5 out of our 7 pieces and are almost ready to start building. Cutting out wood is a timely process, but is...

Continue Reading
4 #RGBchest

4 #RGBchest

My partner, Tarquin, and I worked more on our chest project today. After we gave our order form to Mr. Smith, we decided to mark our wood in order to cut in later in the future. We used the same type of...

Continue Reading
3 #RGBchest

3 #RGBchest

  Me and my partner Tarquin have just finished submitting our order form to Mr. Smith. We listed all our orders down and printed it out. We, combined, have $50. We just used a total of $26 on our...

Continue Reading
2#RGBchest

2#RGBchest

Today, my partner (Tarquin) was absent. Although he was absent, I used my time very good by filling out our order sheet. Our wood would be provided by the teacher, Mr. Smith, but we would still need hinges,...

Continue Reading
Our sketch

1#RGBchest

Our project is to create a chest with RGB lights to store and hold items in a nice way.  We are using wood to make it, and adding hinges and RGB lights to it as well. Today, Me and my partner, Tarquin,...

Continue Reading
Load More Stories
Activate Search
Real Stories, Real People, Real Life
#RGBchest