Today is officially our last post! We will put all of our posts onto this one post to try and replicate a guide or instruction manual. 1. Determine Roles You and your group should determine each...

Today, we are trying to create divots into the motor so that the gear can stay put while the motor is in motion. We used a drill, but that wasn't effective enough so we switched to a dremel. After using...

Today, we worked on putting more spacers on the wheel that will eventually attach to the motor mount. A team member is also programming a box to protect the battery and ESC.  We are also working on attaching...

Today we continued to drummel the truck so that the motor mount will fit on. We also worked on removing the inner parts of the wheel so that the gear will fit with the wheel.

Today, we cut off some of the inner parts of the wheels. We have to adjust so that our motor mount can be put onto the truck of our skateboard. Before After

This skateboard is called the Sidewinding Circular Skates, but it has also been called the "'Post Modern Skateboard'" by many people, for it is a skateboard without the board. It has two wheels, and...

When trying to fit the sprocket (the gear like part of the motor mount)into the wheel, we realized that the first hole we made was slightly off center, so we couldn't continue with these wheels. We are...

The Ownboard (pronunciation: onboard) W1S is a longboard that will leave your mouth hanging wide open. With the remote you will view 3 different modes (the 3 modes are beginner, middle, and proficient)....