Making a 3d printer is pretty hard and expensive, But making one with Arduino is unheard of. But with deep web searching, I've found how to make a 3d printer with Arduino that is cheap and easy but remember...

Three-dimensional printing has changed our way of life by making things from kitchen appliances to human organs. Recently fashion designers have unveiled to the public 3D printed shoes and dresses. These...

Currently in our project, our group drilled holes in our trash can and put screws through them. The holes made room for the motor to fit in. The holes are located to the top part of the trash can and were...

In June 2019, the "Marsha" won the 3-d Printed Habitat Challenge. The challenge started in 2010 and encouraged the public to try and make a mars house that could be 3-d printed, durable, and airtight....

Today we finished connecting all the main parts for the frame, and both the 3D printed wheels will be connected not only to the shaft but also to the motor through the pulley-like device. The battery...

Today we picked out the font for the sign: Mistral. We picked it because it is one of the better-looking scripts and the letters all stayed connected. We chose an Endmill .25" bit, which is a 90 degree...

Most of the materials that we needed to start our project arrived, and the second screw wheel finished printing. Today we finished building the main frame of the vehicle, which was mostly made of Makeblock...

Today we accomplished quite a bit. First, we used the USB stick that came with the machine, and plugged it into a desktop to download the VCarve Pro software. In order to download this software,...

It has been a while since I submitted my purchase order, but my materials have finally arrived after weeks of waiting. With joy and relief, I opened all of them to see what was inside: 3 packages of Neodymium...