Photo of an automatic bubble machine

#BUBBLES- Soldering, Coding

Today s0cceRcat23 continued to write the code for our Arduino. Also, we both researched more on how to code for our project. I soldered together our disk motor and propeller motor. After we finish our...

Continue Reading
Photo of an automatic bubble machine

#BUBBLES- Coding

Today s0cceRcat23 began to code. She was taught some by BBcats, and wrote a few lines of code. I tried to solder together the motors for our disk and propeller, but because of the difficult angle, it didn't...

Continue Reading
Photo of an automatic bubble machine

#BUBBLES- Cutting and Gluing

Today s0cceRcat23 and I cut some things and glued most of our bubble machine pieces. After testing it out, we found that the slot we had made in our trough was too small for the disk, so we took an X-Acto...

Continue Reading
Photo of an automatic bubble machine

#BUBBLES-Learning to solder

Today s0cceRcat23 and I learned and practiced soldering. We watched two videos, and then got a demonstration. After that we each practiced twice with little pieces of wire. Next class we hope to solder...

Continue Reading
Tottenham Hotspur Stadium

Tottenham Hotspur Stadium

The English Football team known as Tottenham Hotspur opened their new stadium in April 2019. This modern building is the second largest in the British Premier League holding 62,062. The stadium features...

Continue Reading
Photo of an automatic bubble machine

#BUBBLES- Gluing and Testing

Today s0cceRcat23 and I glued our bottle cap to the CD and then our motor to the bottle cap. We used hot glue because it makes a strong bond, and dries quickly. We chose to glue our motor to the cap because...

Continue Reading
Photo of an automatic bubble machine

#BUBBLES- Part Delivery

Today, s0cceRcat23 and I received three of our ordered parts. We now have our Arduino PIR motion sensor,  DC motor, and the propeller. We are yet to get our gear motor and rechargeable battery, so we...

Continue Reading
Tokyo Tower

Tokyo Tower

Tokyo Tower is an observation on communication tower. It is located in the Shibakoen district of Minato City, Tokyo, Japan. It was built in 1957, and is used as a support structure for an antenna. The...

Continue Reading
Rain Vortex

Jewel Changi Airport

Just this year, a modern new airport called 'Jewel' opened in Changi, Singapore. Singapore is home to many beautiful structures such as The Gardens by the Bay and the Marina Bay Sands, but the most spectacular...

Continue Reading
Photo of an automatic bubble machine

#BUBBLES- Planning

Today s0cceRcat and I planned out exactly where all of our wood pieces will go. We did not glue the pieces yet because without the motors, we can't be absolutely sure of their measurements. We also discussed...

Continue Reading
Photo of an automatic bubble machine

#BUBBLES- Sanding

Today s0cceRcat23 and I sanded down our CD and a piece of wood acting as one of the legs for our bubble machine. After drilling the holes in our CD last class, we noticed that there were dried bits of...

Continue Reading
Photo of an automatic bubble machine

#BUBBLES- Cutting and Drilling

Today, s0cceRcat23 and I cut out all seven of our wood pieces using the scroll saw. Along with the wood, we cut our water bottle with an X-ACTO knife, and drilled holes in our CD using the drill press....

Continue Reading
Load More Stories
Activate Search
Real Stories, Real People, Real Life