Day #4 E-Board: Brainstorming

Day+%234+E-Board%3A+Brainstorming

By: Henry Orlowski

We’ve encountered some problems with the construction of the board. One of our members cut the board too short. We are currently thinking about how to put brackets on the board effectively. We are going to put it on the underside of the board or the top. The top may not actually reach the wheel so we are most likely going to do the underside idea. This will allow the wheel to spin freely.

This was the main problem, but we are going to put the motor in a wood box to protect it and then link the motor controller to it outside, and the battery to the motor inside the box.